How to write an ISI paper?

How to write an ISI paper?

Table of Contents

How to write an ISI paper? All about ISI papers!

One of the criteria for the production of science in any country is the scientific papers that are written and published. The higher the quality of these papers, the more hope there is for the country’s scientific future. You are already familiar with a variety of scientific papers. But ISI articles have a higher degree and degree because ISI is a measure of the validity of a scientific paper.

So writing an ISI article is a little different from other articles that need to be considered. However, the basic principles of essay writing mentioned in the paper writing guide .should be followed in these articles as well.


What does ISI mean?

To learn more about the ISI paper, you must first become familiar with the concept of the word ISI and its role. ISI stands for Institute for Scientific Information as the Institute for Scientific Information is. The institute was founded in 1960 by a man named Eugene Garfield, and then in 1992 by the Thomson Research Institute, known as Thomson ISI. The work of this institute is to provide services related to the publication of articles and publications.

The word ISI is quite familiar to postgraduate or doctoral students because they need to submit their academic papers to the institute and be accepted to progress in their studies and increase their academic rank. All ISI articles are written in English, so authors must have strong knowledge and skills in writing an article in English.

How to write an ISI papers

Each article published in the ISI Institute must have specific specifications, which we will refer to below.

ISI paper title

  • The title of the article should be short, clear, and have key research words.
  • The title should not exceed 20 words, in which case it will reduce your ISI’s ideal evaluation score.
  • The title of the article should state what is to be achieved during the research and be able to report the content of the article with the least number of words.
  • Note the spelling and grammatical errors in the ISI article title.
  • The title of the article should address the three main components, the variables used the type of relationship between the variables, and the target community.
  • Experimental and quasi-experimental research should include independent and dependent variables in the title of the article.

ISI abstract

Abstract, which translates to “compressed” in English, is one of the most important parts of an ISI article and must be written very strongly and accurately, providing general information about all the steps involved. The abstract should be legible and free of any ambiguity.

The abstract should state the title and method of the work and its steps, and finally the results obtained in a concise and useful way. The abstract of an ISI paper should be written in one paragraph, or a maximum of 250 words.

Be sure to read:   What is a footnote and how is it created? (Full video tutorial)

Abstract steps for ISI paper

You must first be familiar with the text of the article and the research topic.

  • Separate the main content from other content.
  • Keep notes of what you learned from the process.
  • Make a draft of the abstract.
  • Read the draft and correct it and edit as needed.
  • Write the final abstract.
  • Different parts of an abstract

Statement of the problem

This section covers about 2 to 3 lines of abstracts and begins with an introduction. In this section, you should raise the issue in the form of a question and without ambiguity. Avoid using valuable terms and phrases when expressing a problem.

Research Methods

In this section, about 2 to 3 lines should be mentioned the type of research, research place, research period, the research community, sample size selection method, and statistical test type. A researcher can rely solely on research methods that can prove their point.

Research results

This section also contains about 3 to 4 sentences of abstract and includes the results of confirmed or rejected hypotheses.


Keywords are between 3 and 5 words and must be separated by commas. In this section, you should choose words from the title of the article that the reader may choose to search for articles on your topic.

If you need more details, this article will help you to write an effective summary of your article. Be sure to click and read: How  to write an abstract for a scientific article (complete guide + sample)

Introduction to ISI article

Like other articles, the introduction to the ISI article should be written in a way that encourages the reader to read the article. First, define the subject of your article from the sources. The more authoritative this source is, the more the reader becomes interested in reading it. Then explain your research by asking and answering questions from other researchers.

In all of these areas, it is necessary to arrange for years of previous research. you can complete previous research and refer to the relevant reference, otherwise, your article will not be valid enough for the ISI article.

The points that should be included in the introduction of the ISI article, in general, include the following:

  • explaining the problem
  • Express problems and issues related to the topic
  • Asking questions and assumptions
  • The importance of the issue regarding the negative consequences of not paying attention and the positive results of the implementation of the issue
  • Also, as mentioned, a review of previous research should be done.
  • Be careful not to mention one person frequently in the introduction to the ISI article, as this may seem like you have used too few resources.

To write an effective introduction, be sure to read this article:  How to write a good and effective introduction to your article

Be sure to read: The   main reasons for the rejection of the article by the judges and magazines + the solution

Research Methods

In this section, all the work that the researcher has done to write the article is stated, for example, the materials that have been used or the samples that have been taken for work. The research method is very important for printing an ISI article. Be sure to consult with statistics experts to write a research method.

In laboratory studies, the volume of scientific work is generally high, and as a result, various steps have been taken for research. As a result, between one column and two pages can be considered for it.

Research results

In this part of the ISI article, the individual results and the results of previous research on the subject should be mentioned. These results must be complete and legible.

In this section, the author compares his results with other researchers. To increase the scientific credibility of the ISI paper, it is best to discuss current research as much as you can in this section. Also list the research limitations and make suggestions for future research.


This section is completely optional and is not required to do so. It is best to end the article before announcing the sources. At the end of your article, you can thank your professors, friends, and acquaintances in a few short sentences.


As mentioned at the end of all visits, books, and writings to their sources, references, or sources are one of the most important and main parts in writing an ISI article. References must be written in full, and not a single point should be omitted, including the author’s name, number of pages, and journal name. The slightest flaw in this section can invalidate your article to be accepted as an ISI article.

Reading this tutorial fully teaches you how to use a variety of referencing methods in your article: A  variety of references and references in the article and dissertation + Example

Finally, keep in mind that the content of your ISI article should be structured in such a way that not all parts of it, including the first page, the jigsaw, the main text, the list of sources, and tables are more than 15 pages.

 How do we tell if a magazine is ISI?

The list of all ISI journals, also known as the prestigious Thomson Reuters journals, is provided annually by the Thomson Institute to scientists and researchers around the world. There’s a list on the Thomson Reuters site that you can search for and also know which ISI cover each magazine has.

Click here to view the list of ISI journals

In this article, we’ve tried to explain everything you need to know about ISI articles. If the above article was useful to you, we would be happy to share it with your friends and colleagues and share your thoughts and experiences about ISI articles with us in the comments section.

About KSRA

The Kavian Scientific Research Association (KSRA) is a non-profit research organization with the goal of providing research / educational services in December 2013. The members of the community had formed a virtual group on the Viber social network. The core of the Kavian Scientific Association was formed with these members as founders. These individuals, led by Professor Siavosh Kaviani, decided to launch a scientific / research association with an emphasis on education.

KSRA research association, as a non-profit research firm, is committed to providing research services in the field of knowledge. The main beneficiaries of this association are public or private knowledge-based companies, students, researchers, researchers, professors, universities, and industrial and semi-industrial centers around the world.

Our main services Based on Education for all spectrums people in the world. We want to make an integration between researches and educations. We believe education is the main right of Human being. So our services should be concentrated on inclusive education.

The KSRA team partners with local under-served communities around the world to improve the access to and quality of knowledge based on education, amplify and augment learning programs where they exist, and create new opportunities for e-learning where traditional education systems are lacking or non-existent.

Website | + posts

Professor Siavosh Kaviani was born in 1961 in Tehran. He had a professorship. He holds a Ph.D. in Software Engineering from the QL University of Software Development Methodology and an honorary Ph.D. from the University of Chelsea.